Low-Peak™ LP-CC Class CC 600 Vac/300 Vdc, 1/2-30 A time-delay fuses

 

Catalog symbol:   LP-CC-(amp)

Description:

Bussmann™ series Ultimate protection Low-Peak Class CC current-limiting, time-delay fuses. Timedelay – 12 seconds (minimum) at 200% of rated current.

 

Specifications:

Ratings

Volts:   

• 600 Vac

• 300 Vdc (1/2 to 2-8/10 A, 20-30 A)

• 150 Vdc (3-15 A)

Amps :  1/2-30 A

IR :

• 200 kA Vac RMS Sym.

• 20 kA Vdc

 

Agency information

• UL® Listed Class CC, Std. 248-4, Guide JDDZ, File E4273

• CSA® Certified; Class 1422-02, File 53787

• CE

• RoHS compliant

 

Catalog Numbers (Amps)
Catalog Numbers	Catalog Numbers	Catalog Numbers
LP-CC-1⁄2	LP-CC-2-1⁄2	LP-CC-7-1⁄2
LP-CC-6⁄10	LP-CC-2-8⁄10	LP-CC-8
LP-CC-8⁄10	LP-CC-3	LP-CC-9
LP-CC-1	LP-CC-3-8⁄10	LP-CC-10
LP-CC-1-1⁄8	LP-CC-3-1⁄2	LP-CC-12
LP-CC-1-1⁄4	LP-CC-4	LP-CC-15
LP-CC-1-4⁄10	LP-CC-4-1⁄2	LP-CC-20
LP-CC-1-1⁄2	LP-CC-5	LP-CC-25
LP-CC-1-6⁄10	LP-CC-5-6⁄10	LP-CC-30
LP-CC-1-8⁄10	LP-CC-6
LP-CC-2	LP-CC-6-1⁄4
LP-CC-2-1⁄4	LP-CC-7

 

 

Carton quantity

Amp rating	Carton qty
1/2-30	10

 

Features:

• 200 kA interrupting rating complies with NEC® Section 110.9 for today’s large capacity systems.

• Fast short-circuit protection and dual-element, time-delay performance provide ultimate protection.

• Reduces existing fuse inventory by up to 33% when upgrading to Low-Peak fuses.

• Consistent 2:1 amp rating ratios for all Low-Peak fuses make selective coordination easy.

• Time-delay characteristic avoids unwanted fuse openings from surge currents while fast response speed under fault conditions provides a high degree of current limitation.

• Current-limitation protects downstream components against damaging thermal and magnetic effects of fault currents.

• A superior, all-purpose, space-saving branch circuit fuse that meets most protection requirements up to 30 A.

• Very compact physical size that’s only 13/32” x 1-1/2” (10 x 38 mm) with rejction tip.

• Proper sizing can provide “No Damage” Type 2 coordinated protection for NEMA and IEC motor controllers.

• Can be used where either a time-delay or a fast-acting fuse is needed, making selection easier and reducing spare fuse inventories for substantial cost reduction.

• Superior protection for small horsepower motor circuits.

 

Recommended fuse blocks and holders:

Fuse amps	1-Pole	2-Pole	3-Pole
Modular open   blocks
UP TO 30	BCM603-1_	BCM603-2_	BCM603-3_
DIN-Rail   holders
UP TO 30	CHCC1D_	CHCC2D_	CHCC3D_
	—	—	OPM-NG-_
	—	—	OPM-1038_
	—	—	OPM-1038_SW
Panel mount   holders
UP TO 30	HPS-RR	—	—
	HPF-RR	—	—
In-line   holders
UP TO 30	—	HEY	—
	HEZ	—	—

 

For additional information on Class CC fuse blocks and holders, see data sheets:

• Modular open blocks no. 10241 (BCM)

• DIN-Rail holders no. 3185 (CHCC), no. 1109 (OPM), no. 1102 (OPM-1038), no. 1103 (OPM-1038_SW)

• Panel mount holders no. 2113 (HPS), no. 2114 (HPF)

• In-line holders no. 2126 (HEY), no. 2130 (HEZ)